- Zeit, erfassen: A CLI Activity & Time Tracker
18 Oct '20
Zeit is a command line activity & time tracker written in Go, focused on
simplicity and integrability. It is available on macOS, Linux, FreeBSD,
NetBSD, OpenBSD & Plan9.
- DIY: Khadas VIM3 Vertical Stand & Fan Mount
12 Apr '20
With barely any ecosystem around Khadas’ products, I decided to fullfil the need for a stand with integrated cooling for the VIM3 on my own.
- Ultra-Portable Data Center
5 Apr '20
I’m travelling. A lot. And I work with data. With a lot of data. A lot of
private data. My own data, but also data from clients. Highly confidential
data.
- DIY: Raspberry Pi 4 Vertical Stand + Cooler Frames
22 Mar '20
Let’s make the Raspberry Pi 4 finally keep its cool and look that way!
- Khadas VIM3: One of the best performing SBCs you can't make use of (yet)
10 Sep '19
At the end of the day all that remains is basically a tiny SBC with great specs nobody can actually make use of yet.
- SPI between Arduino Mega2560 (Master) and Arduino Nano (Slave)
1 Aug '19
How to wire two Arduino MCUs as master/slave via SPI and transfer useful data
(e.g. sensor readings >1 Byte) from the slave to the master.
- Kiwi, a Nerves-based firmware for the Pimoroni Keybow
14 Apr '19
Kiwi is a Nerves-based firmware for the Pimoroni Keybow that enables the
device to connect via WiFi and control other devices and services through
customizable API calls.
- Meet Lemon, a $79.43 open-source alternative to LaMetric that supports GitHub-, IFTTT- & Zapier-Webhooks
8 Apr '19
And it even integrates with Pushover!
Zeit is a command line activity & time tracker written in Go, focused on simplicity and integrability. It is available on macOS, Linux, FreeBSD, NetBSD, OpenBSD & Plan9.
With barely any ecosystem around Khadas’ products, I decided to fullfil the need for a stand with integrated cooling for the VIM3 on my own.
I’m travelling. A lot. And I work with data. With a lot of data. A lot of private data. My own data, but also data from clients. Highly confidential data.
Let’s make the Raspberry Pi 4 finally keep its cool and look that way!
At the end of the day all that remains is basically a tiny SBC with great specs nobody can actually make use of yet.
How to wire two Arduino MCUs as master/slave via SPI and transfer useful data (e.g. sensor readings >1 Byte) from the slave to the master.
Kiwi is a Nerves-based firmware for the Pimoroni Keybow that enables the device to connect via WiFi and control other devices and services through customizable API calls.
And it even integrates with Pushover!